Komatsu Part O-RING 425-33-11650

—

Product Overview

The 425-33-11650 O-RING is a genuine Komatsu OEM replacement O-ring from the 425 prefix series. This seal is specified in the Komatsu parts system for a particular connection point in your machine's fluid system.

Part Number: 425-33-11650 Part Name: O-RING Part Type: OEM Komatsu Replacement Seal Availability: In stock — ready to ship

—

When to Replace

O-rings are the most common source of hydraulic leaks on heavy equipment. They're inexpensive and quick to replace, but they're often overlooked during routine service. The 425-33-11650 should be replaced whenever:

• The connection shows any sign of fluid leakage — even a small weep will worsen over time
• The O-ring has hardened, cracked, or taken a permanent compression set
• Cuts, nicks, or extrusion damage are visible
• The joint has been opened for any reason — reusing an old O-ring is a gamble that usually results in a comeback leak

—

Installation

1. Confirm 425-33-11650 matches the old seal's size
2. Clean the groove thoroughly — remove all old seal fragments and debris
3. Apply a light coating of assembly lubricant or clean oil to the O-ring
4. Position the O-ring without twisting or rolling — even a slight twist creates a leak path
5. Tighten the fitting or flange to the specified torque

—

Request a Quote

Need the Komatsu 425-33-11650 O-RING? Contact us through the form or by phone, email, or WhatsApp. We respond to all inquiries within one business day.