Komatsu Part HOSE 07121-00304

—

Product Overview

The 07121-00304 HOSE is a genuine Komatsu OEM replacement hose. Hoses are flexible, reinforced fluid lines that carry pressurized hydraulic oil, engine coolant, fuel, or lubricant between components in your Komatsu machine. Each OEM hose is manufactured with the correct inner tube compound for fluid compatibility, the specified reinforcement layers for the working pressure rating, an outer cover that resists abrasion and UV degradation, and end fittings that are crimped at the precise angle required for proper routing without twists that would shorten the hose's service life.

Part Number: 07121-00304 Part Name: HOSE Part Type: OEM Komatsu Replacement Hose Availability: In stock

—

When to Replace

Hydraulic hoses fail through several well-understood mechanisms. Abrasion wears the outer cover as the hose rubs against the machine structure, adjacent hoses, or moving components — the visible reinforcement wires indicate the cover has been completely worn through and the hose strength is compromised. Heat exposure from nearby exhaust components or from the hydraulic fluid itself running above normal temperature hardens and embrittles the inner tube, causing it to crack under the normal pressure pulsations of system operation. Flex fatigue concentrates at the transition from the flexible hose to the rigid fitting, where repeated bending cycles during machine operation fatigue the wire reinforcement until it separates from the crimp. And age degrades all rubber compounds — the plasticizers that keep the material flexible evaporate over time, the rubber cross-links further and becomes harder, and surface cracks develop from ozone and UV exposure. A failed hose under pressure releases a high-velocity stream of oil that can inject through skin, causing serious injury, while also creating an environmental spill. Replace the 07121-00304 when the outer cover shows cracking, bulging, or abrasion; when leaks appear at fittings or through the wall; when soft or spongy spots indicate internal failure; or when the service interval has been reached.

—

Installation

1. Confirm 07121-00304 in your Komatsu catalog
2. Clean the port threads and sealing surfaces before installation
3. Route without sharp bends — stay above the minimum bend radius
4. Allow slack for movement and thermal expansion
5. Secure with clamps at specified intervals
6. Tighten fittings to torque
7. Pressure test through full cycles

—

Request a Quote

Need the Komatsu 07121-00304 HOSE? Contact us through the form or by phone, email, or WhatsApp. We respond within one business day.