Komatsu Part HOSE 07083-01414

—

Product Overview

The 07083-01414 HOSE is a genuine Komatsu OEM replacement hose. Hoses are flexible fluid conduits that carry pressurized hydraulic oil, fuel, engine coolant, or lubricant between components. Each OEM hose is built with an inner tube compounded for compatibility with the fluid it carries, reinforcement layers rated for the system's working pressure with an appropriate safety factor, an outer cover that resists abrasion and UV degradation, and end fittings crimped at the precise angle required for correct routing.

Part Number: 07083-01414 Part Name: HOSE Part Type: OEM Komatsu Replacement Hose Availability: In stock

—

When to Replace

• Outer cover cracked, bulging, or abraded — reinforcement layers are exposed or the hose structure is compromised
• Leaks at either fitting end — the crimp has loosened, the O-ring has failed, or the inner tube has degraded
• Soft, spongy, or blistered spots — the inner tube and reinforcement have separated, and the hose wall strength is dramatically reduced
• Kinked, crushed, or cut sections from physical damage or improper routing during previous service
• Service life reached — rubber compounds degrade over calendar time regardless of operating hours

—

Installation

1. Confirm 07083-01414 in your Komatsu parts catalog
2. Clean the port threads and sealing surfaces on both connections
3. Route without sharp bends — stay above the minimum bend radius for this hose size
4. Allow slack for thermal expansion and component movement
5. Secure with clamps at the intervals shown in your parts diagram
6. Tighten fittings to the specified torque
7. Pressure test through full operating cycles and check for leaks

—

Request a Quote

Need the Komatsu 07083-01414 HOSE? Contact us through the form or by phone, email, or WhatsApp. We respond within one business day.