Komatsu Part CLAMP 07289-00145

—

Product Overview

The 07289-00145 CLAMP is a genuine Komatsu OEM replacement clamp. Clamps are responsible for securing hoses, tubes, and wiring looms in position throughout your machine — preventing movement that leads to chafing, vibration damage, and premature failure of fluid or electrical lines.

Part Number: 07289-00145 Part Name: CLAMP Part Type: OEM Komatsu Replacement Component Availability: In stock — ready to ship

—

Function and Location

This clamp holds a hose, tube, or wiring harness in its designed routing position. Proper clamping is critical because a loose hose can rub against structural components, gradually wearing through the outer cover and eventually causing a leak. In hydraulic systems, a hose that bursts from abrasion damage creates a safety hazard and can cost hours of cleanup and lost production.

—

When to Replace

Clamps deteriorate over time from vibration, heat, and exposure to fluids. Replace the 07289-00145 when:

• The clamp body is cracked, bent, or broken
• The cushion or liner material has hardened, crumbled, or fallen out
• It no longer holds the hose or tube securely — the component can be moved by hand
• Corrosion has weakened the metal portion of the clamp
• The hose or tube was replaced and the old clamp shows signs of wear

—

Installation

1. Position the clamp at the correct location along the hose or tube run
2. Insert the hose or tube into the clamp — make sure any cushion material is properly positioned between the clamp and the component
3. Align without twisting the hose or tube
4. Tighten the fastener to the specified torque — over-tightening can crush a hose or damage the clamp
5. Verify securement — the component should not slide or rotate freely within the clamp

—

Request a Quote

Need the Komatsu 07289-00145 CLAMP? Contact us through the form or by phone, email, or WhatsApp. We respond within one business day.