Komatsu Part BUSHING 195-21-32341

—

Product Overview

The 195-21-32341 BUSHING is a genuine Komatsu OEM replacement bushing from the 195 prefix series. Bushings are the replaceable wear surfaces at pivot joints — they provide the bearing interface between the hardened pin and the housing bore, absorbing the friction and surface degradation that would otherwise damage these far more expensive components.

Part Number: 195-21-32341 Part Name: BUSHING Part Type: OEM Komatsu Replacement Bushing Availability: In stock

—

When to Replace

• Joint looseness detectable by hand — clearance has grown beyond the specification
• Oval or elongated bore shape from directional loading
• Surface cracks, galling, or scoring visible on the bore surface
• Grease leaking past the bushing face — the clearance gap has opened too wide
• The mating pin shows a visible wear ridge — pin and bushing should be replaced together

—

Installation

1. Confirm 195-21-32341 in your catalog
2. Press out the old bushing — use a driver with the correct pilot diameter
3. Clean the housing bore — all old bushing material must be removed
4. Inspect the pin — replace if any wear ridge is visible
5. Press the new bushing to the correct depth — align any grease holes
6. Lubricate the bore before pin insertion
7. Pump fresh grease after assembly and cycle the joint

—

Request a Quote

Need the Komatsu 195-21-32341 BUSHING? Contact us through the form or by phone, email, or WhatsApp. We respond within one business day.